With equipment ready for the field but fields not ready for planting we use our time to complete projects on the never-ending to do list. We had a couple of cattle gates that needed some leveling and reinforcing. It was kind of muddy so we used pallets as a work platform inside the cattle year. The observers stood at the edge of the concrete for a while and then one brave steer ventured off, through the mud, to get a closer look at the situation.
Taking a stroll around the pasture fence, making sure the electric fencing isn’t grounding out somewhere, always attracts the attention of our steers. You always hear about the curiosity of cats but steers are a close second.
We started out our winter shop season with an overhaul of a John Deere CCS air seeder we purchased mid summer. It only has about 5000 acres on it but needed some attention. We dismantled each row unit to install new disk openers, as the old ones were worn down to the point where they would not work as well as we’d like. We also made sure everything else worked on the row units and took grease as well.
Air seeders use a ground drive system to turn the meters. They have a section control system that allows 1/2 of the width to be shut off for narrower areas and to prevent too much seed waste on point rows. We decided to take things up a level and installed the Inetllidrive system. It allows us to control every 30″ section individually thus minimizing overlap with already seeded areas. Electric motors drive each 30″ section and can independently control the feed rate of each section. The company claims that they will save 10-12% on seed costs per acre. That adds up fast when seed beans cost $50/unit plus and we’re using 1.15 units/acre. At a savings of $6/acre this unit will pay for itself in 3 years!